1. <th id="069oy"></th>

        1. <tbody id="069oy"><noscript id="069oy"><video id="069oy"></video></noscript></tbody>
        2. <th id="069oy"></th>
          
          
          1. <tbody id="069oy"><pre id="069oy"></pre></tbody>
            <em id="069oy"><tr id="069oy"><u id="069oy"></u></tr></em>

            Product

            Product

            未標題-1.jpg 


            JUXIN-25

            Pump size:DN25 Flange,Max flow:2740 l/h


            standard:1.1kw Variable frequency motor


            Suction ability up to 9.5   meters and self-priming
            Dry-run   without damage
            For   high viscosity or shear sensitive medium
            No   leaking, no block. No sealing gasket, ball, diaphragm, immersion rotor,   stator and piston etc.
            Pumping   abrasive slurries, corrosive acids, large solids       and gas-liquid mixture.
            No   internal leakage. Flow stability, can accurate and repeatable measurement.   Accuracy ±1%
            No   ancillary equipment, check valves or water flush systems
            Reversing   operation, particle can safety out from suction or discharge pipe
            ◆Minimal   maintenance-just change the hose
            ◆Reliable quality, low using cost


            Flow  rate measured with water of 20℃, out   pressure show as following chart

            JX25參數.jpg


            Product   information

            Inlet/outlet

            DN25 FLANGE


            Motor power

            1.1KW


            Max flow

            0.3 l/min


            Max head

            160m


            Max discharge pressure

            16 Bar


            Lubricant required

            2 L


            Max temperature

            80


            Hose options

            Chlorosulfonated polyethylene rubber(CSM) Natural   rubber(NR)
              foodgrade hose(F NBR)  nitrile   rubber(NBR)  EPDM


            Installation   size (mm)

            25尺寸圖.jpg 


            ?